News from the Block, Innovate Building Solutions Blog
News from the Block, Innovate Building Solutions Blog
Bathroom, Kitchen, Basement Design & Remodeling Ideas for the Nicest Home or Business on the Block
Bathroom, Kitchen, Basement Design & Remodeling Ideas for the Nicest Home or Business on the Block

Is a Glass Block Wall Sturdy?

Glass block wall anchored for stability

I wish I had a dollar for every time someone asked the question, “Is a glass block wall sturdy?” A glass block shower or partition wall will perform flawlessly when the right products and installation techniques are used. Get the straight scoop from installation and supply experts at the Columbus Glass Block and Cleveland Glass Block divisions of Innovate Building Solutions on how to create a sturdy glass block wall using the top 2 installation and fabrication techniques.

The Protect All Vinyl Stack Glass Block Wall and Shower Technique

What is quickly becoming the #1 fabrication and installation method used for glass block wall projects is the “Protect All” vinyl stacking process. This method – which has the benefit of easy to stack (and DIY friendly) wall sections and tight 1/8” grout joints – uses high strength vinyl spacers horizontally and vertically through the glass block sections.

Glass block shower walls using Protect All stack and anchoring system

According to Sean Malmsberry (Operations Manage of Columbus Glass Block), “The “L shaped” anchoring bracket with the Protect All system literally locks in the vinyl spacer to the side of the mounting wall. This approach ensures the glass block wall and the mounting wall become tied together!”

Anchors for a sturdy glass block wall

For tile shower walls Sean recommends to use a grout-caulk between the glass block wall and the supporting wall to eliminate any cracking issues. This “Protect All” process provides a modular, DIY friendly which installs like an adult version of Lego blocks!

Protect All Stacking Process Installs Like Lego Blocks

Traditional Mortar Block by Block Glass Block Wall Technique

When you have a wall which cannot be made with consistent joint sizes between the glass blocks (which is required with the modular Protect All stacking system discussed above) or a slightly curved wall which cannot be pre-made – then the more costly block by block method must be used.

Curved glass block bedroom wall using block by block installation process

Rob Klinc (Vice President of Innovate Building Solutions and General Manager of Cleveland Glass Block) said, “Anchoring in the block by block method is critical for a sturdy long lasting wall. With this technique the materials needed are horizontal panel reinforcing wire (used every 24” through the block courses) and panel anchors which are bent to a 90 degree angle to tie the glass block wall into the side wall. These materials provide the structural support for your wall.”

Panel anchors and panel reinforcing needed for glass block by block method

Conclusion

The bottom line is – whether you choose the modular Protect All Vinyl Stacking System or the block by block method – using the right anchors is essential for a sturdy glass block wall.

Please comment below.

###

If you have any technical questions or want to get a price on either a supplied DIY glass block wall or an installation call Innovate Building Solutions on a nationwide basis (877-668-5888) or for a local project their divisions including Columbus Glass Block (614-252-5888), Cleveland Glass Block (216-531-6363), West Side Glass Block (216-398-1020) or Mid America Glass Block (513-742-5900) of Cincinnati or Dayton and Akron (330-633-2900).


Mike Foti

President of Innovate Building Solutions a nationwide supplier and regional (Cleveland and Columbus) remodeling contractors. Some of our product lines include glass counters, floors, backsplashes, glass blocks and grout free shower and tub wall panels

Comments (2)

  • Ravi – thanks for your question. For a glass block bar with a granite countertop we recommend you have a wood structure behind the bar which will support the weight of the granite countertop. Glass blocks can basically support their own weight but with granite I would have most of this weight be carried by the wood substructure. To make the wall stronger we prefabricate glass block walls using a Protect-All system of vertical and horizontal support members. You can find more about this system in the following web link – http://innovatebuildingsolutions.com/products/glass-block/glass-block-walls-bars

  • I’m creating a wall which is shaped as the letter J. How do I make it strong so it can hold a granite counter top. I have raised wood floor in my basement where the bar is going. Thanks

Leave a Reply

Your email address will not be published. Required fields are marked *