‘So, you’ve had it up to here’ (as Mom used to say) with dirty, ugly, moldy grout joints in your shower.
You’ve told your spouse, either this tile shower goes, or I do.
You’ve started ‘kicking the digital tires’ for a solution. You’re comparing different shower wall panels systems from acrylic to cultured granite to PVC composite to laminated wall panels. You’re almost ready to pull the trigger and plunk your money down.
However, there’s still something gnawing at you. You still feel you’re missing some details you need to make the right choice.
This uncertainly when buying shower and bathroom wall panels is common. Many homeowners (and even professional contractors) don’t have experience with the products out there. You’re a rookie and don’t want to screw up!
The question becomes how can you make sure you’ve thought of (almost) everything before you make the best choice for your project?
That question is what this article is looking to answer. My goal here is simple. I want to point out 7 essential things (along with a few pointers) most people don’t think about (but should) when buying shower wall panels.
I want you to get it right…. the first time.
So, without further delay let’s dig into these 7 essential things.
When Susan told you, she was sick and tired of cleaning grout in your master bathroom shower and YOU had to finally do something about it you weren’t exactly jumping for joy. Oh boy – another major remodeling project thrown onto your already too long honey-do list. As she made her remodeling demand known (loud and clear) you couldn’t help thinking you’d much rather be eating honeydew than doing the honey-do list!
You’ve been putting Susan off for years on this shower job. It doesn’t take a rocket-scientist to see your tile shower is a scummy, moldy mess. The shampoo bottles sitting on the floor aren’t exactly the safest thing either.
You resign yourself to the not-so-fun trip to the home center store. Before you go, you know the drill. You take measurements. You make a drawing of your tile shower. You already see problems (that’s a nice way of saying pain in the rear headaches you’ve got to deal with):
Headache #1 – The walls are ½” out of square (that’s par for the course for this house).
Headache #2 – There is a window smack dab in the middle of the back wall in your first-floor bathroom. You know Susan hates the privacy blinds in the shower.
Headache #3 – You’ve got 4 uncommon wall sizes in the shower and there is also no place built into your existing shower to store soap and shampoo.
You’re no rookie making this home center store trek. You’ve done remodeling in the three homes you and Susan have owned over the last 25 years. Now, even though both of your “little girls” are off at college (wow – how time has flown) and your a ‘quasi-empty-nester’ – the need to bring out your inner “Tim the Tool Man Taylor” has not gone away .
You check out the standard fiberglass panels on the shelf. You don’t see how any of them will work. You note the following problems with these home center shower kits:
The wall panel sizes are rectangular and consistent in size (that’s what you’d expect from mass produced wall panels – but they won’t solve your out of square problem).
You don’t see any trim offered to work around the window. (you also have to figure out the window privacy problem. Susan is tired of the blinds in the shower).
All the shower wall panel kits are in standard sizes (60 x 32, 48 x 36, 36 x 36 etc.) which won’t work with your 4-wall custom sized shower.
The young dude in the orange smock you get to “help” you is clueless on how to make their products work with your custom sized shower. Houston – you have a problem!
A shower wall panel installation project can be a headache (especially with custom sized showers) if you don’t have a few “tricks” (AKA – products and installation techniques) up your sleeve. Below we’ll take a quick look at 5 little-known ideas to get rid of your shower wall panel installation headaches. You’ll get Susan the shower she wants (and you know she deserves – despite the fact you don’t really want to do it!). At the end of the article let me know if these tricks were helpful to you – and if you have any cool tricks up your sleeves to share as well.
If you’ve got a custom sized shower or tub and HATE tile you know what a pain it can be finding a long-lasting, good looking alternative. You may struggle locating any decent looking panels which don’t know look like a cheap Home Depot special. Even if you do find a nice bathroom wall panel, then you get “the pleasure” (sarcasm intended) dealing with your stuck-in-the-mud general contractor who refuses to install anything but tile (another remodeling hurdle for you). If you decide to DIY this job you may not have the right tools or experience to cut the panels or end up breaking one and costing yourself more money (ouch!). The question is who you gonna call (Ghostbusters doesn’t do construction work) to figure this doggone project out?
Here’s a quick and painless solution for you. Read below about the 5 pains of custom bathroom walls panels. You’ll learn not only about the hassle of bathroom wall panels, but most importantly get ideas to fix these problems without pulling out your hair (or yanking out your husband’s few remaining hairs either).
Isn’t the window in your shower a pain in the butt? I bet you’ve asked yourself on more than one occasion, “why the heck did a builder put a see-through window smack dab in the middle of our shower? Was the guy who built this home an exhibitionist? Didn’t he also know water would be hitting on the wood trim surrounding this shower window sill each and every day and eventually the wood will rot out?”
Now, you’ve got a problem. Everyone in your family is after you to do something about this deteriorated window trim. The challenge is where to start? What’s the right solution to fix this trim?
The other day I was talking to Jeff Spurio, a Shower and Window Design Consultant, and we were discussing how frustrating shower windows are for homeowners. While it may be tempting to rip down the old and put up some new trim (something certainly more waterproof than wood!), simply retrimming the window may not be the best solution to get your shower (or combined tub/shower unit) problems behind you.
As Jeff told me, “Mike – as in life – I guess we need to step back and see things in a wider perspective. See what’s going on not only with the window trim, but to think about questions like do we even have the right window and are the shower walls built to last?” As the old saying goes, “it doesn’t make sense to put lipstick on a pig.” It certainly doesn’t make sense to put new trim around a shower on its last leg or a window which doesn’t open or provides no privacy.
In this article, I’m going to give you some inside tips Jeff shared with me explaining how he helps people to not only think through selecting the right trim to use around shower windows, but most importantly to develop a solution to make sure their entire showering system (walls, window and trim) will perform well (and look nice) over the long run. Let’s take a peak at 5 ½ tips (yes – the ½ tip is important as well) Jeff shared with me to help you get the right window trim AND the right showering system.
Who uses a small alcove tub space for bathing anymore? The answer – practically no one. It doesn’t fit our fast-paced lifestyles. Who loves framed sliding glass doors or shower curtains around their bathtubs….probably very few. They’re a hassle to clean. If you’re like most you’d like to ditch your tub for a walk in shower and assumed you didn’t have enough room….well think again. In this article learn how a tub can be converted into a curved glass block shower in 5 simple steps.