7 Biggest Blunders with Walk in Showers (and How to Avoid Them)
Updated October 24, 2021
Lisa was excited to tell me when she was on vacation, she experienced the neatest thing in the bathroom or her contemporary hotel room. It was a curbless, doorless walk in shower.
It didn’t have a flimsy shower door to clean (like her tired bathroom at home). It was safer for her husband Bill to walk into (even though he won’t admit it he’s gained a ‘few’ pounds since his football days of years gone by. His mobility isn’t ‘quite’ the same). Lisa went on to say, this shower would be perfect if her Mom and Dad – who are beginning to show their age – need to move in down the road.
Lisa – was excited to explore a walk-in shower for the bath remodel her and Bill are planning to do later this year.
Lisa went on to say when she shared her excitement with friends, neighbors, family and even a few contractors they started raining on her parade. They became the ‘Mr. and Mrs. Doubt-Fires – throwing doubt and rain on her fire and passion for this shower. Here’s some of the comments she heard:
- With a walk-in shower you’ll get too much water on the bathroom floor.
- You’ll be cold in there without a full glass enclosure or shower curtains.
- You don’t have enough room for a walk-in shower.
- Are you sure you can even do a walk-in shower since your master bathroom is on the 2nd floor?
She asked me, “Mike, should I continue to explore this idea, or blow it up before I get in too deep?”
I went on to tell Lisa I wish I could tell her all the doubts and fears her friends, neighbors, family members and even contractors told her was a bunch of crap. However, but I’ve seen my share of walk in shower blunders over the years. I know the following equation is one she wouldn’t want associated with her job:
(A poorly designed and built walk in shower) = (A bad walk in shower)
I then offered to share with Lisa the 7 biggest blunders (and misconceptions) I’ve seen with walk in showers. I didn’t want her to repeat.
Since Lisa liked these ideas, I thought I’d share them with you. I hope they make it clearer if a walk-in shower is right for your project.
Blunder #1 – You assume you don’t have enough room for a walk-in shower, so you blow off the idea
This blunder occurs way too often. You listen to bad information from others who tell you’ve got to have a BIG bathroom to make a walk-in shower work. This simply isn’t the case.
Bathroom Remodeling Ultimate Guide
Making the Most of Your Bathroom Makeover!
In reality you can have a walk-in shower in the tiniest bathrooms, IF you’re willing to have a more open design. You can even have a walk in shower in a space which was converted from a tub. These spaces are 60” wide x 32” to 34” deep. Look at 3 options below.
Blunder #2 – You use the wrong shower head, place it in the wrong spot, and water gushes out.
The type of shower head is very (or very, very as Trump would say) important in a walk-in shower. It doesn’t take an engineer to figure out if you use a stationary shower head directed at the opening of a walk-in shower, you’re going to get water on the bathroom floor.
If you’re designing a small walk in shower, use a rain head which is, by design, directed down at your head (not blasting full-force at your body). It will reduce the chance of water flowing out onto the bathroom floor.
Blunder #3 – There will be too much of ‘you’ showing than you’d like with a walk-in shower
For some people right after they have installed a beautiful clear-glass walk in shower they stand back and think…it’s perfect.
It’s perfect…until their little kids barge in and can see them in their ‘birthday suit.’
It’s perfect …until their husband comes in and wants to have a conversation when they were hoping and praying for a few minutes of privacy in the shower.
A walk-in shower doesn’t have to ‘put you on display’ for everyone in your family who wants your attention RIGHT NOW! You need to design a smarter walk in shower which gives you the personal space (and showering privacy) you crave.
Glass Block Shower Ultimate Guide
The Ultimate DIY Guide for your Next Bathroom Remodel
Instead of going with clear glass with a big opening – size it down with a shower screen (mentioned in blunder #1) with a twist. Use obscure glass vs. clear glass.
Another strategy is to use an obscure wave pattern glass block shower wall. It can create a private, yet open, shower for you.
Blunder #4 – Your walk-in shower creates puddles on the bathroom floor
Nobody wants puddles on their bathroom floor which reminds you of the ones you jump over because of uneven asphalt in your work parking lot. When one level shower and bathroom floors aren’t leveled right this is exactly what can happen in your bathroom also.
Get Our Ultimate Shower Base Guide!
Step Up Your Bathroom by Stepping Down Your Shower Pan!
An even bigger concern with pooling water is if it leaks onto the floor (or God-forbid) furniture below. That can be a disaster!
There is a simple solution to eliminate this problem. Make sure your shower base (or shower floor) has been built with a system (not done by hand by some dude who could be having a bad day) which is pre-sloped and waterproofed. Here’s three ways to make this happen.
- First, if you want a ‘flat’ (or one level shower and bathroom floor) use a shower base former and waterproofing kit. These kits not only waterproof the shower, but the bathroom floor as well.
- Second, if you want to use a low-profile shower pan (and just slope the shower area), don’t pick up the cheapest one you find at a big-box store. One nicer option is a reinforced acrylic shower pan – also known as a ‘Flexpan.’ The bottom of this acrylic pan is built on sturdy MDF sub core, so it won’t bend when you’re walking on it, or crack down the road.
- Third, if you want a waterproof – anti-bacterial – and uber-stylish shower pan check out the low profile stone shower pans below. You can get them in fun patterns and colors (or also in simple matte white and matte black) with textured bottom surfaces for safety.
Blunder #5 – You see a nice walk in shower built with teeny-tiny mosaic shower floor tiles which are now brown, dirty and moldy
Tile showers are beautiful the day they’re installed.
Tile showers don’t stay beautiful as you and your family use them. Dirt, grime and mold become their middle names.
Cleaning tile showers is enough to make you want to pull your hair out. It’s disgusting. You’ve got better things to do with your life.
You KNOW you don’t want a walk-in shower if you’ll become a slave to cleaning tiny grout joints.
Here’s 2 ideas to work-around this dilemma.
- Idea #1 – Use a linear drain. Linear drains allow you to use large format tiles. While they don’t blow up joints all together, they cut them down to a manageable size.
- Idea #2 – Use a non-grouted one level wet room system. When I saw this system at this years Kitchen and Bath Industry Show I was very excited (maybe you’re saying right now, ‘Mike, YOU NEED to get out more often).’ However, there is now a non-grouted wet room system (which comes in modern matte white and matte black finishes). This system gives you the one floor look and ZERO (yes – you heard that right – ZERO) grout joints. It comes in a 63” x 35 ½” size which can also be cut to fit smaller sizes
- Idea #3 – Use a patterned stone low threshold shower pan. You likely didn’t realize there were SO MANY options in shower pans. But leave it to the Spaniards (who are also major innovators in tile design) to come up with fun shower pans – which are also perfect for walk in showers. Don’t settle for a boring, white fiberglass shower pan which ends up looking yellow in a few years. Get a stone pan with some punch!
Blunder #6 – You didn’t design your walk-in shower to keep you warm
The good thing about a full glass enclosure is it keeps the water and steam enclosed. You stay toasty warm (especially if you have the hot water turned up full blast). That’s how I like it.
A walk-in shower, by the nature of its design, has an openness a full shower enclosure does not. This openness allows heat to escape. The question becomes, how can you have the ‘best-of-both-worlds,’ an open design and a warm shower?
Here’s a couple of ways to get these 2 benefits.
First, add a heated floor. They’ll keep you warm (even in the harsh, cruel winters those of us in the Midwest and East are hoping are done once and for all this year).
Second, you can go ‘half-way’ with your open shower system. Incorporate a pivoting shower screen, which takes up half the opening. It keeps more steam inside. It’s truly a best of both worlds’ idea.
Blunder #7 – You assume you have to build a tile shower (which will be a maintenance hassle) since you need a custom size
Since most walk-in showers aren’t an ‘out-of-the-box’ rectangular unit you can grab at the big-box store, most people assume their custom design requires using high maintenance grouted tiles for a luxury look.
This simply isn’t the case anymore. Here’s 3 better (and low maintenance) options:
Option 1 – Laminated shower wall panels
If you want a custom tile or stone look (and the ability to chuck your poor, unwanted tile scrub brush) there is a no-hassle option for you. This option is laminated shower wall panels. These 2’ x 8’ x 3/8” units click, lock and seal together. You get low maintenance. You win the battle over the scrub brush. And if you want to get ‘expensive-to-lay’ tile patterns without the expense, these click and lock patterns even take the ‘sting’ out of creating a fun white herringbone pattern like you’ll see below.
Get Free Samples!
Click here to request free samples of our Laminated Waterproof Shower Wall Panels.
Option 2 – High-style modern glossy wall panels
If you want your wall to pop (without your knee-joints popping from scrubbing tile) a fun option is bright high gloss wall panels. These 39” x 96” and 60” x 96” panels are fun, shiny and add pop and excitement to your bathroom or shower walls. They’re also simple to cut.
Option 3 – Decorative faux stone wall panels
These digitally printed, ¼” thick panels give you the classic look of marble and stone with a super-simple installation process. Your friends and neighbors will THINK you spent big-bucks on your shower. It can be your little secret you didn’t (and it was simple to install it yourself).
So now that you’ve read the 7 biggest blunders of walk in showers (and how to avoid them) are you ready to push ahead despite the FEARS (False Evidence Appearing Real) from the ‘Mr./Mrs. Doubt-Fires’ in your life who wanted to cool your passion for a walk-in shower?
Do you have any specific questions about a walk-in shower for your home you want advice on? If so, call me (or a member of my team) to get technical advice and factory-direct pricing on one level wet room systems, low profile solid surface shower pans, glass walk in showers, or curved glass block walls. We’re looking forward to helping you.
For more information about a walk-in shower product contact Innovate Building Solutions at 877-668-5888. For a local remodeling project call Cleveland Design and Remodeling at 216-658-1270 or in Columbus The Bath Doctor at 614-252-7294.
If you’re in the building business, click here if you’d like to learn how to become a shower wall panel dealer of the laminated wall panels mentioned above or call and ask for Mike at 877-668-5888.
If you’re a remodeler or builder and want practical advice on remodeling products, industry trends, marketing and sales tips to grow your business (and cut day to day hassles), start reading my newest blog – Innovate Builders Blog. It’s packed with ideas you can use now. Click here to Sign Up for the Innovate Builders Blog.